Brick adhesive specification
Thermiston
Technical specifications of the thermostone adhesive
Packaging and Storage
Beast block mortar is supplied in plastic bags of 25 kg/35 kg. Store the product in a clean, dry area protected from direct sunlight and extreme heat and cold. It should be stored as supplied, until ready for use. Pallets can be stacked twice as high with care to spare. Opened bags should be used first. Unopened bags can be stored for 12 months. Use the oldest material first.
Properties Typical
- Cement based, thin layer dry mortar for cellular / lightweight concrete blocks and panels, etc.
- Additives are plasticizing agents, adhesion-enhancing agent and water-retaining agents
- Inert filler, finely graded quartz filler
| density | 1.50 kg/Itr |
| Initial tensile strength | 1.8 Nmm² - 2007:JS921 |
| thermal conductivity | W/M.K 0.26 |
| compressive strength | 14.3 N/mm² with an average of 28 days |
| tensile strength | 6.3 N/mm² with an average of 28 days |
| maximum application time | 60 minutes at + 30 ° C |
| application temperature | +5°C to +40°C |
| Consumption | w 5 - 4 kg / m² for brickwork |
| Mixing water rate | 6.5-6 25 kg/L |
| the color | grey/white |
| Storage | 1 year |
| Packing | 35/25 kg |
| Chemical Composition | Thermal Cement | Tio2 | CAO | Ca(OH)2 | MGO | Fe2O3 | AL2O3 | SIO2 |
| Chemical Composition |
|---|
| Thermal Cement |
| SIO2 |
| AL2O3 |
| Fe2O3 |
| MGO |
| Ca(OH)2 |
| CAO |
| TIO2 |
25 liter plastic bags
It must be free of impurities, oils, dust and concrete admixtures
Mixing is done either by means of a mixer or by hand, according to the rules and according to the following
1 - Empty the bag or bags
2- Add fresh water according to the instructions on the bag (each bag is 10-12 liters) according to the nature of the climate
Thermoplastic plaster is done either by the usual manual methods or by specialized spray bales after spraying the surface with water manually.
1 – Demolition
2 – قصارة ناعمة من 0,5 سم الى 1 سم
Spray machine
1 – قصارة ناعمة من 0.3 سم – 0.5 سم )
It is sprayed with water
Solid dry 48 hours
Complete dehydration 14 days
Full sclerosis 40-60 days
Product shelf life after mixing 45 minutes
For more information, the prevalence rate of calculus
(5-6) m² per bag (50) kg
soft plaster
12 م² لكل كيس 25 كغم/لتر
(120 kg/cm²) after 45 days
0.001%
0.178
250°ᴼ - 3cm thickness
To maintain the technical and physicochemical properties of thyroplasty, the following must be taken into account in the process of painting and brushing.
1- Do not use oil-based paints or pastes
2 - Use only water-based paints and pastes.
The product contains cement, avoid contact with eyes and skin for a long time. For more detailed information, study the relevant Material Safety Data Sheet.
Beast block mortar should always be applied according to the method given in this technical data sheet. GCI is not liable for any claim arising from product failure due to improper procedure or use of the product for a purpose not recommended. Please contact the company's technical team for more details about the Beast block mortar application
The product is not considered dangerous goods during transportation.
Shelf life is 12 months when stored in dry conditions at normal temperature and humidity.