Technical specifications for internal plaster
Packaging and Storage
Beast plaster is supplied in plastic bags of 25 kg./ 35 kg. Store the product in a clean, dry area protected from direct sunlight and extreme heat and cold. Opened bags should be used first. Unopened bags can be stored for 12 months. Use the oldest material first.
A dry, thin-layer, cement-based plaster product with a fine grain gradient of 25 microns - 1.2 mm, plaster for blocks, cellular / lightweight concrete panels and other concrete surfaces.
Additives are plasticizing agents, adhesion-enhancing agents and water-retaining agents.
|Initial tensile strength||1.8 Nmm² - 2007:JS921|
|thermal conductivity||W/M.K 0.26|
|compressive strength||14.3 N/mm² with an average of 28 days|
|granular gradient||25 microns - 1.2 mm|
|tensile strength||6.3 N/mm² with an average of 28 days|
|maximum application time||60 minutes at + 30 ° C|
|application temperature||+5°C to +40°C|
|Consumption||w 5 - 4 kg / m² for brickwork|
|Mixing water rate||6.5-6 25 kg/L|
|Chemical Composition||Thermal Cement||Tio2||CAO||Ca(OH)2||MGO||Fe2O3||AL2O3||SIO2|
The product contains cement, avoid contact with eyes and skin for a long time. For more detailed information, study the relevant Material Safety Data Sheet.
Beast plaster should always be applied according to the method given in this technical data sheet. The Company is not liable for any claim arising from non-performance of the product due to improper procedure or use of the product for a purpose not recommended. Please contact the company's technical team for more details on the application of Beast plaster
The product is not considered dangerous goods during transportation.
Shelf life is 12 months when stored in dry conditions at normal temperature and humidity.